Have you ever been bothered by these problems:

1.Want to know what happened to whole cars? 2.Had to purchase additional adapters to diagnose your vehicle, with the lack of CANFD/DOIP protocols of scanner? 3.Limited service functions, or limited vehicle compatibility to lost your more business for workshop?

Take it easy! 2025 LAUNCH X431 CRP919 EV Bi-Directional Scan Tool can easily master your car condition and perfectly solved all of these things.

Why is the LAUNCH CRP919 EV the Top Choice for 2025?

1. Launch 2025 The first EV car diagnostic tool ,Covering 120+ Brand Electric Vehicle/New engry car

2.Supports Battery Pack detection,Supported Models: for BYD EVs, for Tesla EVs, for BMW EVs, for Audi EVs, for AlON,for Chrysler/for Dodge/for Jeep EVs, Changan EVs...
Supported Battery Brands: for AISHANG, for GUIBO, for MIAOYI,for HANGSHENG, for MAILAN, for ECAR,for XINYI, for KELIE, for GUOXIN...

3.Bidirectional Control(Active Tests): Same as X431 Series, Receive information and send the commands to the system/components to perform specific tests, like EVAP Test, Fuel Pump Test, Cooling Fan Test, Window/Door Locks, etc. Significantly reduce your diagnostic time.
Advance

4.ECU Coding: LAUNCH CRP919 EV newly released advanced ECU coding , which only be equipped on professional OEM scanner. After performing the ECU coding, some ECUs may not display the new code and will need to run this function to display the correct code.

5.43+ Hot Reset Service: A/F Reset, Brake Reset, Oil Reset, SAS Reset, Battery Reset, ABS Bleeding, Elec. Throttle RLRN, TPMS Reset, DPF Regen, AC System Relearn/Initalization, ADBlue Reset, AFS Reset, Clutch Matching, Compressor Test (EV), Coolant Bleed, Engine Power Balance Monitoring, DCDC Test (EV), Coolant Replacement…

6.OE-level Full Systems Diagnosis: One touch to Auto Scan All available systems to read/clear codes, version information, data stream reading, Active test, and coding.Quickly Scan All Modules and Create Detailed Reports

7.2025 New Add-on Modules: All are sold separately to meet your various needs: 1.Battery Tester(BTS360): View the health status of the vehicle's battery and hlep you to fix battery detection faster and easier. 2.TPMS(X431 i-TPMS): Activate all 315/433MHz sensors, relearn & program LAUNCH sensors;3.Camera function: Allows you to take photo of your vehicle situation anytime, anywhere. 4.Remote Assistance: Your technician can use TeamViewer to provide remote assistance for you.

8.Mall ,You can purchases more Software in the mall to better meet users' comprehensive needs.

9.More User-friendly Features: Supports auxiliary functions such as battery voltage detection, viewing diagnostic reports, diagnostic record playback, screenshots and sharing

10.Auto Auth for FCA SGW + CANFD & DoIP NEW Protocols: Supports FCA AutoAuth for FCA vehicles (Chrysler, Dodge, Fiat, etc.) after 2017. (*AutoAuth account needs to be purchased by yourself.) Newly Added CANFD & DoIP protocols for CANFD/DOIP covering new vehicle models (No required CAN FD/DOIP Adapter, saving over 200 bucks).

11.Optimized HIGH-END Hardware Configurations: Powerful Android 10.0 OS for rapid response without delay, Lasting 6000mAh Battery, 7” Touch Screen, 4G/64G Memory, 2.4G &5GHz Dual WiFi, 5G WiFi Communication automatically connects within 20 meters, far better than traditional BT connection in transmission rate, diagnostic; One-click WiFi Update to add more new features & newer vehicle coverage.

12.2-Years Free Updates

13.Multi-Lingual: 11 Languages optional, choose your native language without any sort of language barrier. English, Spanish, French, German, Russian, Italian, Portuguese, Japanese, Korean, Polish and Traditional Chinese.

In short, if you are considering to get a professional auto scanner with limited budget, CRP919 EV is a perfect option.

 

>>OE-Level Diagnoses with All-Around & In-depth Diagnoses

If you want to diagnose the whole car, including battery, steering, suspension, audio, or headlamp system…Then you will find the full-system diagnostic tool – LAUNCH X431 CRP919E professional scanner to be a perfect choice. Same as the Snap-on scanner & X431 V Pro 4.0/X431 Pro3S+, 2024 automotive diagnostic scan tool LAUNCH CRP919E works well on 150+ car makes and 100000+ models worldwide (1996 and newer) to read/ clear codes, read ECU info., view Live Data, do active tests, perform special functions and etc. for all available systems, providing you with a Dealership-Level diagnosis, getting the accurate and in-depth diagnosis across all automotive systems.

1.Read ECU Information of the control units including unit type, version numbers, etc., offering useful reference for repair work.

2.Read/ Clear DTCs to locate problems and clear the codes after certain repairs.

3.View Live Data stream of each sensors and graph it, data record and playback, also includes Transmission Temperature, Misfire, etc common live data.

4.View the Freeze Frame of faults. For example, when an engine misfire is detected, a snapshot of the current sensor values is captured.

5.Perform Active Tests/Bi-directional Control to accurately figure out the work status of modules.

6.Perform Special Functions to do various daily automotive maintenance functions on certain systems.Product Profile

For Workshops, you can share the diagnostic reports in PDF files or print it for your customers, letting customers know exactly what types of problems their cars have fixed, winning the trust of customers. For DIYers, all-around & in depth diagnostics and offers you a reliable solution, saving lots of time and money for maintenance and repair at the dealership.

>>2025 LAUNCH CRP919 EV NEW FUNCTIONS--Battery Pack detection

Supported Models: for BYD EVs, for Tesla EVs, for BMW EVs, for Audi EVs, for AlON,for Chrysler/for Dodge/for Jeep EVs, Changan EVs... Supported Battery Brands: for AISHANG, for GUIBO, for MIAOYI,for HANGSHENG, for MAILAN, for ECAR,for XINYI, for KELIE, for GUOXIN...

>> ADVANCED ECU CODING

If you want to diagnose the whole car, including battery, steering, suspension, audio, or headlamp system…Then you will find the full-system diagnostic tool – LAUNCH X431 CRP919 EV professional scanner to be a perfect choice. Same as the Snap-on scanner & X431 V Pro 4.0/X431 Pro3S+, 2024 automotive diagnostic scan tool LAUNCH CRP919E works well on 150+ car makes and 100000+ models worldwide (1996 and newer) to read/ clear codes, read ECU info., view Live Data, do active tests, perform special functions and etc. for all available systems, providing you with a Dealership-Level diagnosis, getting the accurate and in-depth diagnosis across all automotive systems.

What can LAUNCH CRP919 EV's ECU Coding Do for You?

Online Coding: Compatible for VW/ for Audi/ for Skoda/ for Ford/ for Lincoin/ for Mazda ONLY. LAUNCH CRP919 EV Scanner can directly access to online vehicle repair data to do high-level repairs. 2024 Newly Add PMI(Programmable Module Installation) function: For Ford /for Lincoin/ for Mazda etc. Allowed you to copy data from the original module and install it in the new unit to finish module replacement.

Offline Coding: Compatible for Benz/ for BMW/ for Ford/ for Mazda /for Jaguar /for Vauxhall /for Opel, etc. Read the code from the original module, and then write the code for the new module.

Refresh the Hidden Features(Personalization): Make full use of the hidden features to disable annoying functions. Such as: disbale auto start-stop, disable daytime running light, disable safety belt warning, delete transport mode, corrected fuel consumption calculation, etc.

Component Matching: Matching, relearning, calibration, or initialization adaptive data for certain components after repairs or replacements. Such as: gearbox matching, suspension calibration, seat matching, head light fitting, door and window initialization study, sunroof initialization, injector calibration, etc.

Customize OE-Settings(Retrofitting/Modification): Alter the pre-programmed options to change how the vehicle behaves originally, activate high-end features, boosted the vehicle performance. Such as: halogen fog lamps retrofitted with xenon fog lamps, different capacity battery retrofit, different size tires retrofit; modifit to add adaptive cruise control, tire pressure monitoring system, reversing radar, etc.

After performing the ECU coding, some ECUs may not display the new
code and will need to run this function to display the correct code.

2025 Bi-Directional Scan Tool - Precisely Locate Issue, Turn Your Business to Fast Lane

appearance of this feature on LAUNCH basic diagnostic tools, making CRP919EV the most cost-effective LAUNCH scanner. The application of Bi-directional Control, also named Active Test, Actuator Tests, Functional Tests, Inspection Tests, System Tests or the like, improves 5X faster efficiency of problems location and diagnostic accuracy, significantly saving the mechanic/workshop time, turn the auto workshop business to fast lane.

Featuring bi-directional control, LAUNCH X431 CRP919 EV automotive diagnostic scan tool for all cars, can output the commands to ECUs to perform specific tests for checking actuator's working status to quickly pinpoint problem parts without disassembling the vehicle.

For example:

If a part is not working and leads to the failure, it could be a faulty component, wiring, relay, or command. Using LAUNCH Scanner CRP919E to command component to do active tests, like switch on/off, you can quickly determine whether it’s a wiring, relay, or component issue without removing any parts. The process just takes < 5 minutes. If test manually? At least 3X times as long

Active tests are often widely performed on different parts, such as:

Adaptive Headlamp Adjustment; A/C Configuration; Window Wipers Setting; Doors Turn on/off; Sunroof Switch on/off; Mirrors Folding/Unfolding; Active tests on Interior lights, Inside Mirrors, Door Locking, Steering Wheel Heating, Windows, Horn, Fuel injectors, ABS Pump Motor, Cooling Fan, Solenoid Valves, Relays, etc.

Commonly-Used Active Tests, including:

Fuel Pressure Control Valve Test, Fuel Trim Enable, Fuel Injector Tests, Fuel Pump & Valve Tests, Injector Buzz Test, Oil Pressure Control Test

Cooling Fan Test, Window/Wipers/Sunroof/Door Lock/Headlamp Test, Interior Lighting Test

EVAP Tests: EVAP Purge Solenoid Valve, EVAP Vent Solenoid Valve, EVAP Purge/Seal

HVAC Calibration, Vehicle Level Position Calibration, Modulate Throttle

Cycling A/C Clutch Relay, Cycling ABS Motor Pump, Cycling Cylinder
 

2025 LAUNCH X431 CRP919 EV Automotive Diagnostic Tool with 43+ Maintenance Functions, Meet Your Increasingly Prosperous Business

>>More Than 43 Species Functions, Always Keep Growing with UPDATE:

1. Oil Maintenance Reset: Reset the new calculation of Engine Oil Life system once changed the oil and turn off the oil light.

2.SAS Calibration : Clear the fault steering angle sensor memories, perform reset steering angle sensor, and turn off steering wheel warning light.

3. EPB(Electronic Park Brake) Reset: Reset the calipers, brake discs or pads after the electronic parking brake system is repaired.

4.Battery Reset: Reset after replacing the battery to clear the low battery fault information of the original battery and protect the new battery.

5.Throttle Relearn: Reset the throttle to accurately regulate throttle (or idle engine) operations, helps keep your idling and acceleration smooth.

6. ABS Bleeding: Perform to bleed the brake system to restore ABS braking sensitivity and obtain a firm brake pedal.

7.TPMS Reset,(1. When the tire pressure fault indicator light is on, after repair, the tire pressure needs to be reset through the tire pressure reset function to turn off the tire pressure fault indicator light. 2. In the case of low tire pressure or leakage, replacement or installation of tire pressure monitoring equipment, replacement of tires, damage to tire pressure sensors, tire rotation of cars with tire pressure monitoring function, etc., the tire pressure of the car must be reset after the repair is completed.)

8.D.PF Regeneration: Clear diesel particles from the filter through oxidation or combustion to stabilize the filter performance.

9.immo reset: (1. In order to prevent the car from being used by illegal keys, the car can only be started and used normally after the anti-theft control system on the car recognizes and authorizes the remote control key through the anti-theft key matching function. 2. When replacing the ignition switch key, ignition switch, combination instrument panel, engine control unit (ECU), body control module (BCM) and remote control battery, anti-theft key matching is required)

10. Injector Coding: Code a new injector to better identify injectors to accurately control fuel injection.

11.RESET GEAR: 1. After replacing the engine ECU, crankshaft position sensor, crankshaft flywheel, and any fault codes that have not been learned by gear signal, gear signal learning is required.

12.Air Level Calibration,

13.Gearbox Matching,

14.Windows Calibration,

15.sunroof initialization,

16.AFS RESET (Reset headlight adaptation (headlight matching)),

17.Reset exhaust gas recirculation,

18.RESET seat matching,

19.RESET tire modification

20.change language

21.A|F adjustment(Used to set or learn air/fuel ratio parameters.)

22.electronic water pump activation(Before exhausting the cooling system, use this function to activate the electronic water pump.)

23.Transport mode release

24.AdBlue Rest

25.Nitrogen oxygen sensor reset(It is a sensor used to detect the nitrogen oxide (NOx) content in the engine exhaust. NOx fault reinitialization and replacement of NOx catalytic converter requires resetting the catalytic converter learning value stored in the engine ECU.)

26.start-stop (The vehicle opens or closes the automatic start-stop function by flashing the driving computer hidden (provided that the vehicle has hidden functions and hardware supports it).

27.Automatic air conditioning initialization,

28.Smart cruise control system calibration,

29.Engine power balance,

30.GPF regeneration,

31.Motor angle position sensor calibration,

32.High-voltage battery health detection(New Energy),

33.turbocharger matching,

34.clutch matching,

35.ECU reset,

36.FRM reset,

37.gateway module data calibration,

38.rain and light sensor reset,

39.coolant replacement new energ,y reset,

40.compressor test new energy reset,

41.OBC Test,(New Energy)

42.DCDC Test(New Energy)

Keep Growing with Update.

2025 LAUNCH X431 CRP919 EV for 120+ Brands, Supported FCA AutoAuth + CAN-FD/DOIP New Protocols

2025 LAUNCH X431 CRP919 EV with Unmatched Vehicle Coverage and Growning (99.99% Global Vehicles Coverage)

2025 newly upgraded scanner LAUNCH CRP919 EV works well with 120+ brand EV car, 100000+ American, European, Asian and Brazil car models, and even some of the latest car models. It also introduces CAN FD/DoIP new protocols into vehicle communication and diagnostics, supports AutoAuth for FCA SGW.


 

> >Support CAN FD/DoIP New Protocols, No Required CAN FD/DoIP Adapters for DIagnosis

CAN FD: Compatible with GM models (2019 and later), NO CAN FD Adapter Required, Saving 100+ bucks for you. CAN FD overcomes the limitations of the classical CAN bus in terms of data transfer rate. The data throughput of CAN FD is 6X higher than classical CAN.

DoIP: Compatible with BMW (F&G chassis), Volvo models (2018 later), Land Rover & Jaguar models (2017 later). With Diagnostics over DoIP, diagnostics introduced over UDS are used over TCP/IP and Ethernet. This enables much higher data rates than with CAN. That makes LAUNCH CRP919E save both in terms of time and expenses in the case of complex diagnostic tasks and flash applications.

>>AutoAuth Access: Bypass SGW in FCA Vehicles

2025 LAUNCH CRP919E bidirectional scan tool also supports FCA functions, allowing you to pay to clear codes, do bi-directional control (active tests), and perform special functions for FCA cars (Chrysler, Jeep, Dodge, Fiat etc.) after 2017 without special adapters. (*AutoAuth account needs to be purchased by yourself. )

>>11 Languages Optional, No Language Barrier

LAUNCH CRP919E is designed to service global users with different language background and this is reason why it offer various language options. The default language of this device is English. It can now support up to 11 languages: English, Spanish, French, German, Russian, Italian, Portuguese, Japanese, Korean, Polish and Traditional Chinese.

Get More in LAUNCH CRP919 EV

[8-IN-1 Graphic Live Data] This revolutionary 8-IN-1 live data (multiple PIDs on one screen) brings you a clear picture of what’s going on with your vehicle, accessing info. such as throttle position, engine load, feul tank pressure, RPM, and more. You can visually diagnose and monitor your vehicle’s running status in real-time.

[Expansion Modules +++] Add the LAUNCH BST360 Battery Tester to your CRP919 EV for comprehensive battery checks, including health, starting system, and charging tests. Also, you can connect LAUNCH X431 i-TPMS to this car scanner for complete TPMS solutions: sensor acti-vation, relearn, pr0gram, health status monitoring and more.**If you are interested in buying these expansion modules, we have ample stock available and can ensure prompt delivery.

[Print & Share Diagnostic Report] The LAUNCH CRP919 EV makes it simple to create a diagnostic report automatically. You can save it, sent it to e-mail, or print it out via a printer, to have a clear and accurate picture of what’s going on with your car.

[Online Repair Database] From how-to guides to repair videos, and everything in between --- like DTC help, car manuals, and real-life repair stories. It’s like having a virtual repair shop at your fingertips!

[Real-time Voltage Monitor] Give you immediate feedback on the current voltage status of the OBD2 data link connector (PIN 16). Note that this is quick battery check, not a full diagnosis.

[Built-in Google] The CRP919 EV car scanner comes with Google Chrome built-in. It’s super handy for quickly looking up what those fault codes mean, or for checking out any other info or news you’re curious about.

[Diagnostic History] This X431 car diagnostic scanner keeps track of every little detail during the diagnostic process. You can quickly jump back into the vehicle’s data, and pick up where you left off or check out the test report --- no need to start all over again!

[DTC Guidance] Get detailed help with DTCs (Diagnostic Trouble Codes)! This scan tool offers complete DTC database, giving you in-depth explanations, potential causes, and step-by-step troubleshooting for every DTC that comes up during a scan. This extra info helps you pinpoint the car problem fast and make diagnoses that are spot-on and quick.

[One-Touch Upgrades via Wi-Fi] The LAUNCH X431 CRP919 EV OBD2 scanner comes with 2 years of software upgrades. Simply upgrade it with a single click via Wi-Fi to access more features, faster speed, and upgrades more frequently than other car scanners.

Specification for LAUNCH CRP919 EV

■ Screen size: 7 inches (1024*600)
■ Android version: Android 10.0
■ Battery capacity: 3.7V/6000mAh
■ Packing size: 422*122*352 (mm)
■ Product gross weight: 3.95 kg
■ Running memory: 4GB
■ Storage size: 64 GB
■ Upgrade method: online upgrade



 

Package List

1pc * CRP919 EV 7 inch Tablet PC
1pc * OBD Diagnostic Cable
1pc * Charger Cable
1pc * US Plug
1pc * UK Plug
1pc * EU Plug
1pc * Manual
1pc * Quick Guide