V1.5 Super MINI ELM327 Bluetooth ELM 327 Version 1.5 OBD2 OBDII for Android Torque Car Code Scanner
1.The version is 1.5
2.This item doesn't work on IOS.If you need an item which works on IOS,you can buy our elm327 wifi OBD2.
3.Project bluetooth password:1234
4.This link is not including PIC18F25K80 Chip
The newly developed wireless scan tool.
It supports almost OBD-II protocols.
Bluetooth connection, no Batteries, Cables, or Switches.
Wireless (Bluetooth) 5~10 meter
Retrieve Fault Codes (DTCs) and clear Check Engine lights.
Can also be used with a PC with a Bluetooth Card.
Read diagnostic trouble codes, both generic and manufacturer-specific , and display their meaning (over 3000 generic code definitions in the database).
Clear trouble codes and turn off the MIL ("Check Engine" light)
Set the maximum number of responses to obtain
Remove spaces from ECU responses (to speed data transmission)
Store a unique identifier in EEPROM
Set the CAN mask and filter with one command
Easily switch between variable and fixed CAN message lengths
Send CAN remote frames (RTRs)
Display current sensor data, including:
Calculated Load Value
Fuel System Status
Short Term Fuel Trim
Long Term Fuel Trim
Intake Manifold Pressure
Intake Air Temperature
Air Flow Rate
Absolute Throttle Position
Oxygen sensor voltages/associated short term fuel trims
Fuel System status
1.SAE J1850 PWM(41.6Kbaud)
2.SAE J1850 VPW(10.4Kbaud)
3.ISO9141-2(5 baud init,10.4Kbaud)
4.ISO14230-4 KWP(5 baud init,10.4 Kbaud)
5.ISO14230-4 KWP(fast init,10.4 Kbaud)
6.ISO15765-4 CAN(11bit ID,500 Kbaud)
7.ISO15765-4 CAN(29bit ID,500 Kbaud)
8.ISO15765-4 CAN(11bit ID,250 Kbaud)
9.ISO15765-4 CAN(29bit ID,250 Kbaud)
A.SAE J1939 CAN(29bit ID,250*Kbaud)
B.USER1 CAN(11*bit ID,125*Kbaud)
C.USER2 CAN(11*bit ID,50*kbaud)
*default settings(user adjustable)
Works on all OBD2 Vehicles (1996 onwards in USA) and EOBD vehicles
For your information:
For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant.
for Alfa Romeo/ for Ad/ for Bentley/ for BW/ for C-adillac/ for C-hevrolet/ for Chrysl/ for C-itroen/ for Daewoo/ for F-iat/ for F-ord/ for G-M/ for Hod/ for H-yundai/ for Isuzu/ for J-aguar/ for J-eep/ for Kia/ for LandRover/ for L-exus/ for M-azda/ for Mercury/ for Mini/ for N-issan/ for M-itsubishi/ for Opel/ for P-eugeot/ for Posch/ for Renault/ for Rover/ for Saab/ for Seat/ for S-koda/ for Toyt/ for Vauxhall/ for V-olvo/ for VW
This hardware can match many other software still!But most of them are not free!
Works for Windows98/ME/2000/XP/Vista & 7 !
This tool does not match abs and airbag system!
A.1*Mini ELM327 Bluetooth Diagnostic Interface
Q: What's the version of this unit?
A: It's V1.5 version of this unit.
Q:What's the difference for the Version V1.5 and V2.1?
A: The V1.5 version one can do much more car models than V2.1 one.
Q. What's the Password of the Bluetooth?
A: It's "1234" .
Q: If it can do all most car models and diesel car models?
A: No, it can just support most standard OBD II car models, Dieser car models can't be supported.
Q: Which android system phone can compatible? If it can compatible with Iphone?
A: Please kindly use Android V 4.0- 4.4 or V5.0. The Iphone can't be supported.
Q: Why my computer can't connect with this Bluetooth?
A: This unit is with V2.0 version Bluetooth, check your computer if it's V2.0 version, or please use V2.0 bluetooth adapter.
Q:Why my phone can't connect with the Bluetooth?
A: Please kindly check if you choose the bluetooth connect way in software setting.
Q:My phone can connect with the unit, but it can't find my car?
A: 1. please check ifyou choose the "OBD II" adapter of " adapter choice" in setting software. 2. check if your android system version is V4.0 - 4.4 or V5.0. 3. check the protocol of this car if it can be supported, and try with more new cars.